 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Document 734 Flyback Transformer For Linear Technology LT3751 Capacitor Charger Controller * Flyback transformer for the Linear Technology LT3751 Capacitor Charger Controller * 120 - 377 V input; up to 500 V output * 3000 Vrms isolation from primary to secondary windings Core material Ferrite Terminations RoHS tin-silver over tin over nickel over phos bronze. Other terminations available at additional cost. Weight 23.8 g Ambient temperature -40C to +85C Storage temperature Component: -40C to +85C. Packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 24 per tray PCB washing Only pure water or alcohol recommended Part number HA4060-AL 1. 2. 3. 4. Inductance at 0 A1 10% (H) 300 Inductance at Ipk2 min (H) 270 DCR max (Ohms)3 pri sec 0.422 1.58 Leakage inductance4 max (H) 2.7 Turns ratio5 pri : sec 1:3 Ipk2 (A) 2.0 Volt-time product typ (V sec) 600 Inductance is measured at 100 kHz, 0.1 Vrms. Peak primary current drawn at minimum input voltage. DCR is with the windings connected in parallel. Leakage inductance is for both windings of the primary with the secondary windings shorted. Dot indicates pin 1 1 12 5. Turns ratios are with the primary and secondary windings connected in parallel. 6. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. 0.108 2,75 1 1.10 28,2 1 2 12 8 7 0.039 1,00 Pri 11 12 Sec 6 5 HA4060-AL CCIxxxx 1.053 max 26,75 0.148 3,75 Recommended Land Pattern 0.148 3,75 0.079 2,00 Primary windings and secondary windings to be connected in parallel on PC board. 0.551 max 14,0 1.024 26,0 1.350 max 34,29 0.004 / 0,10 Dimensions are in inches mm Specifications subject to change without notice. Please check our website for latest information. Document 734 Revised 02/0909 (c) Coilcraft, Inc. 2009 |
Price & Availability of HA4060-AL
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |